[chore] bump gruf/go-store to v2 (#953)

* [chore] bump gruf/go-store to v2

* no more boobs

vendor/github.com/klauspost/compress/flate/dict_decoder.go

@@ -0,0 +1,184 @@
+// Copyright 2016 The Go Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style
+// license that can be found in the LICENSE file.
+
+package flate
+
+// dictDecoder implements the LZ77 sliding dictionary as used in decompression.
+// LZ77 decompresses data through sequences of two forms of commands:
+//
+//	* Literal insertions: Runs of one or more symbols are inserted into the data
+//	stream as is. This is accomplished through the writeByte method for a
+//	single symbol, or combinations of writeSlice/writeMark for multiple symbols.
+//	Any valid stream must start with a literal insertion if no preset dictionary
+//	is used.
+//
+//	* Backward copies: Runs of one or more symbols are copied from previously
+//	emitted data. Backward copies come as the tuple (dist, length) where dist
+//	determines how far back in the stream to copy from and length determines how
+//	many bytes to copy. Note that it is valid for the length to be greater than
+//	the distance. Since LZ77 uses forward copies, that situation is used to
+//	perform a form of run-length encoding on repeated runs of symbols.
+//	The writeCopy and tryWriteCopy are used to implement this command.
+//
+// For performance reasons, this implementation performs little to no sanity
+// checks about the arguments. As such, the invariants documented for each
+// method call must be respected.
+type dictDecoder struct {
+	hist []byte // Sliding window history
+
+	// Invariant: 0 <= rdPos <= wrPos <= len(hist)
+	wrPos int  // Current output position in buffer
+	rdPos int  // Have emitted hist[:rdPos] already
+	full  bool // Has a full window length been written yet?
+}
+
+// init initializes dictDecoder to have a sliding window dictionary of the given
+// size. If a preset dict is provided, it will initialize the dictionary with
+// the contents of dict.
+func (dd *dictDecoder) init(size int, dict []byte) {
+	*dd = dictDecoder{hist: dd.hist}
+
+	if cap(dd.hist) < size {
+		dd.hist = make([]byte, size)
+	}
+	dd.hist = dd.hist[:size]
+
+	if len(dict) > len(dd.hist) {
+		dict = dict[len(dict)-len(dd.hist):]
+	}
+	dd.wrPos = copy(dd.hist, dict)
+	if dd.wrPos == len(dd.hist) {
+		dd.wrPos = 0
+		dd.full = true
+	}
+	dd.rdPos = dd.wrPos
+}
+
+// histSize reports the total amount of historical data in the dictionary.
+func (dd *dictDecoder) histSize() int {
+	if dd.full {
+		return len(dd.hist)
+	}
+	return dd.wrPos
+}
+
+// availRead reports the number of bytes that can be flushed by readFlush.
+func (dd *dictDecoder) availRead() int {
+	return dd.wrPos - dd.rdPos
+}
+
+// availWrite reports the available amount of output buffer space.
+func (dd *dictDecoder) availWrite() int {
+	return len(dd.hist) - dd.wrPos
+}
+
+// writeSlice returns a slice of the available buffer to write data to.
+//
+// This invariant will be kept: len(s) <= availWrite()
+func (dd *dictDecoder) writeSlice() []byte {
+	return dd.hist[dd.wrPos:]
+}
+
+// writeMark advances the writer pointer by cnt.
+//
+// This invariant must be kept: 0 <= cnt <= availWrite()
+func (dd *dictDecoder) writeMark(cnt int) {
+	dd.wrPos += cnt
+}
+
+// writeByte writes a single byte to the dictionary.
+//
+// This invariant must be kept: 0 < availWrite()
+func (dd *dictDecoder) writeByte(c byte) {
+	dd.hist[dd.wrPos] = c
+	dd.wrPos++
+}
+
+// writeCopy copies a string at a given (dist, length) to the output.
+// This returns the number of bytes copied and may be less than the requested
+// length if the available space in the output buffer is too small.
+//
+// This invariant must be kept: 0 < dist <= histSize()
+func (dd *dictDecoder) writeCopy(dist, length int) int {
+	dstBase := dd.wrPos
+	dstPos := dstBase
+	srcPos := dstPos - dist
+	endPos := dstPos + length
+	if endPos > len(dd.hist) {
+		endPos = len(dd.hist)
+	}
+
+	// Copy non-overlapping section after destination position.
+	//
+	// This section is non-overlapping in that the copy length for this section
+	// is always less than or equal to the backwards distance. This can occur
+	// if a distance refers to data that wraps-around in the buffer.
+	// Thus, a backwards copy is performed here; that is, the exact bytes in
+	// the source prior to the copy is placed in the destination.
+	if srcPos < 0 {
+		srcPos += len(dd.hist)
+		dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:])
+		srcPos = 0
+	}
+
+	// Copy possibly overlapping section before destination position.
+	//
+	// This section can overlap if the copy length for this section is larger
+	// than the backwards distance. This is allowed by LZ77 so that repeated
+	// strings can be succinctly represented using (dist, length) pairs.
+	// Thus, a forwards copy is performed here; that is, the bytes copied is
+	// possibly dependent on the resulting bytes in the destination as the copy
+	// progresses along. This is functionally equivalent to the following:
+	//
+	//	for i := 0; i < endPos-dstPos; i++ {
+	//		dd.hist[dstPos+i] = dd.hist[srcPos+i]
+	//	}
+	//	dstPos = endPos
+	//
+	for dstPos < endPos {
+		dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:dstPos])
+	}
+
+	dd.wrPos = dstPos
+	return dstPos - dstBase
+}
+
+// tryWriteCopy tries to copy a string at a given (distance, length) to the
+// output. This specialized version is optimized for short distances.
+//
+// This method is designed to be inlined for performance reasons.
+//
+// This invariant must be kept: 0 < dist <= histSize()
+func (dd *dictDecoder) tryWriteCopy(dist, length int) int {
+	dstPos := dd.wrPos
+	endPos := dstPos + length
+	if dstPos < dist || endPos > len(dd.hist) {
+		return 0
+	}
+	dstBase := dstPos
+	srcPos := dstPos - dist
+
+	// Copy possibly overlapping section before destination position.
+loop:
+	dstPos += copy(dd.hist[dstPos:endPos], dd.hist[srcPos:dstPos])
+	if dstPos < endPos {
+		goto loop // Avoid for-loop so that this function can be inlined
+	}
+
+	dd.wrPos = dstPos
+	return dstPos - dstBase
+}
+
+// readFlush returns a slice of the historical buffer that is ready to be
+// emitted to the user. The data returned by readFlush must be fully consumed
+// before calling any other dictDecoder methods.
+func (dd *dictDecoder) readFlush() []byte {
+	toRead := dd.hist[dd.rdPos:dd.wrPos]
+	dd.rdPos = dd.wrPos
+	if dd.wrPos == len(dd.hist) {
+		dd.wrPos, dd.rdPos = 0, 0
+		dd.full = true
+	}
+	return toRead
+}